Main application and component classification of C section steel machine

C section steel machine main frame with 400H section steel optional mold cut punch and fly saw cut punch

Main machine forming roller 13 rows; The motor power of the hydraulic station is 22KW as the main engine drive: the adjustment range is 80-300mm and the waist height is 35-100mm

Main technical parameters of fully automatic C section steel equipment:

10 meters long, easy to operate touch screen image durable

Punching power cutting; The middle board of the main engine is fixed with 20mm thick double tie rod without shaking in high-speed operation

Taiwan delta PLC is used for electrical cabinet; The main machine runs 16 meters per minute. The c-section steel equipment is mainly composed of passive loading rack, leveling device, punching device, cutting device after molding, hydraulic station, computer control system, etc. The roll material is made of nine chromium and two molybdenum materials forging, pressing and electroplating

C section steel equipment is a set of rollers can produce a variety of specifications of C type purline finished products of the single-coil forming unit, easy to operate and other characteristics.

The finished product of c-section steel purlins rolled by c-section steel equipment has good tensile bending and compression performance, good flatness and automatic punching; C section steel equipment with automatic flying saw punching, quick and convenient installation.

Cutting tools do not need to be replaced, high degree of automation, three minutes of arbitrary change, C steel equipment products can be used as the main structure of large and medium-sized industrial and civil buildings; We used the left moving way, such as web, flange, flange edge can be done;

Quick changeover,

CZ steel all-in-one machine; I broke the traditional loose-bolt bushing way.

Coaxial design, in 1 mm, can be adjusted in any size within the specification, such as: small side E: 10, 11... 20mm, in mm

Unit adjustment, base width W: 80, 81... 300mm, in 1 mm.

Adjustable, e.g., small side E: 10, 11... 20 mm. Base width b1b2:30, 31... 80 mm. Such as plant, warehouse, stadium, market garden shed roof load and wall support

External size 10000*1100*1500 (mm) does not include single-head feeder, tray, etc

Control system industrial computer console (PLC, frequency converter, trip switch and other core original

Imported brands) panasonic, mitsubishi, schneider, omron

Forming pass C/Z steel roller main forming 18 pass before and after leveling and lead feed pass excluding material roll material GCr15(bearing steel) after heat treatment plated with hard chrome

C section steel equipment spindle material 40Cr quench heat treatment after polishing hard chrome plating

Full-automatic fixed-length cutting waist height h. 30, 31... Three-step change of 80mm.cz, no-pole change of z-type steel machine. It can be changed at will to reduce the height difference between the two sides of the broken shaft.

It is explained that the C section steel machine is replaced by non-pole rapidly.

Waist height h, 120, 121... 300mm, can be changed at will.

Equipment parameters equipment type CZ steel 2-in-1 non-pole fast purlin (roll) molding machine arbitrary variation of equipment color blue customizable color weight of equipment