The main reason for the appearance of paint tile press

The main reasons for the paint phenomenon of tile press:

Tile press appears to paint this aspect of the main reason is related to the early debugging. Generally speaking, the purchase of tile press equipment, caigang tile press factory will be debugging personnel to help operate, debugging. If the problem is in the debugging error can be directly contact caigang tile machine factory to adjust and test again, until the solution to this problem;

The reason that presses tile machine to bring about bottom wheel to delimit lacquer, that is bottom wheel problem, it is likely to be on the one hand hold a few superfluous things to affect. Just think, the bottom wheel running at high speed next to some irrelevant debris, how can not be a problem. On the other hand, the reason why the distance between the wheels is too narrow leads to too much friction. If this is the problem, how to solve the tile machine bottom wheel painting problem? Very simple, it is to roll up and down the gap between some larger. Generally speaking, the clearance to increase, friction will be reduced, the problem of painting natural solution.

There is another possible cause for painting. Some color steel tile press after a long time of operation, the bottom wheel will come loose and sway back and forth, this is the result of the deviation. If this is the case, it can be solved by adjusting the deviation.

Color steel tile pressing machine factory warm remind all the operation of the tile pressing machine friends, if the bottom wheel paint, do not panic. The first thing to do is to check the problem and keep a record of it so that the debugger can refer to it. In addition, in the use of the process to pay attention to the protection of color steel tile press equipment, reduce the probability of problems.